MANUFACTURED BY: |  | DOLMAR MASCHINEN-FABRIK GmbH & Co. |
 | | HAMBURG, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1973 |
YEAR DISCONTINUED: | | 1977 |
ENGINE DISPLACEMENT: | | 61 ccm (3.7 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 44 mm (1.732 in.) |
PISTON STROKE: | | 40 mm (1.575 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | CHROME plated aluminum |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 4.1 DIN |
WEIGHT: | | 7.9 kg |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast MAGNESIUM |
MAGNETO TYPE: | | Bosch |
CARBURETOR: | | Walbro SDC or Tillotson HS-148A series |
MAJOR REPAIR KIT: | | RK-23HS for Tillotson |
MINOR REPAIR KIT: | | DG-5HS for Tillotson |
AIR FILTER SYSTEM: | | Nylon mesh element |
STARTER TYPE: | | Dolmar automatic rewind |
OIL PUMP: | | Automatic, worm gear driven |
MAXIMUM ENGINE RPM: | | 7,500 |
IDLE RPM: | | |
IGNITION TIMING: | | 2.4 to 2.8 mm (0.094 to 0.110 in) before TDC |
BREAKER POINT SETTING: | | 0.3 to 0.4 mm (0.012 to 0.016 in.) |
FLYWHEEL/COIL AIR GAP: | | Fixed position under flywheel |
SPARK PLUG TYPE: | | Bosch WKA 225 T3 |
SPARK PLUG GAP: | | 0.5 mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 25:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | SAE 30 two-stroke oil |
CHAIN PITCH: | | 3/8 in. |
CHAIN TYPE: | | |
BAR MOUNT PATTERN: | | 19 link |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | Dolmar Orange with Black rear handle |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |