Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: DCS 340

MANUFACTURED BY:
MAKITA CORPORATION
ANJO, AICHI JAPAN
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
33 ccm
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
37 mm
PISTON STROKE:
31 mm
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
1.4 kW @ 9,000 rpm
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Automatic rewind
OIL PUMP:
MAXIMUM ENGINE RPM:
11,500
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
2 mm
SPARK PLUG TYPE:
NGK BPMR-6F
Champion RDJ-7Y
SPARK PLUG GAP:
5 mm (.020 in.)
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
400 ml
FUEL OIL RATIO:
50:1
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
3/8 low profile
CHAIN TYPE:
Oregon 91
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
35 cm (14 in.)
LONGEST GUIDE BAR SUPPLIED:
40 cm (16 in.)
COLOUR SCHEME:
Makita Blue
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Saw manufactured by Dolmar



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.