MANUFACTURED BY: |  | BARKER SAW CO. |
 | | SPRINGFIELD, MISSOURI, U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 2.0 cu. in. (32.7 cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.437 in. (36.4 mm) |
PISTON STROKE: | | 1.250 in. (31.7 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Sand cast magnesium |
MAGNETO TYPE: | | Wico flywheel type |
CARBURETOR: | | Walbro |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | Dacron fiber element |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | |
BREAKER POINT SETTING: | | |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | |
SPARK PLUG GAP: | | |
CRANKSHAFT MAIN BEARINGS: | | Ball and caged needle roller |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 1/2 pint to 1 gallon = 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade |
MIX OIL SPECIFICATION: | | Barker 2 cycle engine oil |
CHAIN PITCH: | | 3/8 in. |
CHAIN TYPE: | | Oregon 72D |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |