Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: KMS-4

MANUFACTURED BY:
DOLMAR Maschinen-Fabrik GmbH & Co.
HAMBURG, GERMANY
SERIES OR ASSEMBLY NUMBER:
128
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1975
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
58 ccm
NUMBER OF CYLINDERS:
3
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
SACHS Wankel rotary engine
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
8 SAE at 8,000 rpm
WEIGHT:
8.9 kg with 40 cm bar & chain
19.6 lbs. with 16 in. bar & chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic adjustable
MAXIMUM ENGINE RPM:
4,500 to 8,000
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
600 cc
FUEL OIL RATIO:
50:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 30
CHAIN PITCH:
3/8 in. (9.5 mm)
CHAIN TYPE:
Oregon 73D
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
20 in. (50 cm)
COLOUR SCHEME:
Dolmar Red enamel with Black air filter cover
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:




Photo courtesy Keith Mudgway collection.
 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.