Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: DDA110

MANUFACTURED BY:
DANARM UK
STROUD, GLOUSTERSHIRE, ENGLAND
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1966
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
109.8cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
63.5mm (2.50 in.)
PISTON STROKE:
34.9mm (1.375 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
5 British
WEIGHT:
23 lbs. with 16 in. bar 7 chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
5,200
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
7/16 in.
CHAIN TYPE:
Oregon 62C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:
24 in. (61cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Basically a copy of the Pioneer model 6-20



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.