Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 995-G

MANUFACTURED BY:
HOMELITE-TEXTRON
PORT CHESTER, NEW YORK, USA
SERIES OR ASSEMBLY NUMBER:
995-G, 995-G-1
serial numbers start at 1720551
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1964
YEAR DISCONTINUED:
1965
ENGINE DISPLACEMENT:
6.83 cu. in. (112cc)
NUMBER OF CYLINDERS:
Homelite Two-Cycle single cylinder loop scavenged engine
CYLINDER BORE:
2.3125 in. (58.7mm)
PISTON STROKE:
1.625 in. (41.2mm)
PISTON RING THICKNESS:
0.0625 in. 2 rings, pn 56828
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Reed valves (4 petal pyramid)
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
27 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 6 metal shoes
DRIVE TYPE:
3 Gear reduction, 2.84:1 standard, 3.57:1 optional
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Flywheel type, Phelon, with breaker points
CARBURETOR:
Tillotson HL-119A
MAJOR REPAIR KIT:
RK-88HL
MINOR REPAIR KIT:
DG-5HL
AIR FILTER SYSTEM:
Wix pleated paper element
STARTER TYPE:
Homelite automatic rewind with overruning bearing clutch
replacement cord is 48 in. of #5
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
9,000 free, 6,000 under load
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.015 in. (0.38mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion HO-3
SPARK PLUG GAP:
0.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
56 oz. (1.65 litres)
FUEL OIL RATIO:
1/2 pint to 1 gallon with Homelite mix oil
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Homelite chain saw mix oil
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon 10C, 10L or 32C
BAR MOUNT PATTERN:
16 link
SHORTEST GUIDE BAR SUPPLIED:
18 in. (45cm)
LONGEST GUIDE BAR SUPPLIED:
60 in. (152cm)
COLOUR SCHEME:
Black piston grip. Homelite Red cylinder shield, cylinder shroud and flywheel shroud. Canyon Green crankcase, gearcase and fuel tank.
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Wraparound front handle optional


Saw in SON Ranch Logging Equipment Collection

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.