Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: VI-200

MANUFACTURED BY:
HOMELITE-TERRY MACHINERY
POINTE CLAIRE, QUEBEC, CANADA
SERIES OR ASSEMBLY NUMBER:
UT50054
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1973
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
3.5 cu. in. (57 ccm)
NUMBER OF CYLINDERS:
Homelite Two-Cycle single cylinder loop scavenged engine
CYLINDER BORE:
1.8125 in. (46 mm)
PISTON STROKE:
1.375 in. (35 mm)
PISTON RING THICKNESS:
0.063 in. 2 rings used, pn 59436
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
4 petal pyramid reed valve
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
12.5 lbs. (5.67 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Vibration Isolated
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 6 metal shoes
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Flywheel type with breaker points
CARBURETOR:
Tillotson HS-125A
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Cellulose fiber eloement
STARTER TYPE:
Automatic rewind, replacement cord is 45 in of #4.5
OIL PUMP:
Automatic gear driven
MAXIMUM ENGINE RPM:
6,000 under load
IDLE RPM:
IGNITION TIMING:
30 degrees BTDC
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
0.004 to 0.008 in. (0.1 to 0.2 mm)
SPARK PLUG TYPE:
Champion RCJ-6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller on flywheel side, ball on clutch side
FUEL TANK CAPACITY:
23 fl. oz. (680 ml)
FUEL OIL RATIO:
32:1
RECOMMENDED FUEL OCTANE:
Regular automotive
MIX OIL SPECIFICATION:
Homelite oil
CHAIN PITCH:
3/8 in
CHAIN TYPE:
Oregon 72D
BAR MOUNT PATTERN:
01 link
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
20 in. (50 cm)
COLOUR SCHEME:
PAINT CODES:
Homelite RED
ILLUSTRATED PARTS LIST:
IPL no. 122248 rev 1 and rev 2
SERVICE MANUAL:

COMMENTS:
Manufactured in and sold in Canada. Terry Machinery was
a division of Textron Canada




 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.