Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 98 Hi-Baller

MANUFACTURED BY:
DANARM CANADA
SERIES OR ASSEMBLY NUMBER:
Junior model C
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1947
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
98cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2 in. (50mm)
PISTON STROKE:
2 in. (50mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Cast Iron
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
4
WEIGHT:
40 lbs. with 15 in. bar & chain
18kg with 38cm bar & chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Manual, cork disk in oil bath
DRIVE TYPE:
Roller chain reduction
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Villiers
CARBURETOR:
Villiers
MAJOR REPAIR KIT:
n/a
MINOR REPAIR KIT:
n/a
AIR FILTER SYSTEM:
Wire screen element
STARTER TYPE:
Rope
OIL PUMP:
Manual, oil reservoir in front handle
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
.250 in. before TDC
BREAKER POINT SETTING:
0.015 in. (0.38mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Lodge CB3 (18mm)
SPARK PLUG GAP:
0.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
20:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 40
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Orange enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:


Saw in Mike Acres collection photographed by L. Trudel

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.