MANUFACTURED BY: |  | HOMELITE-TEXTRON |
 | | PORT CHESTER, NEW YORK, USA |
SERIES OR ASSEMBLY NUMBER: | | XL-100 series |
YEAR INTRODUCED: | | 1968 |
YEAR DISCONTINUED: | | 1971 |
ENGINE DISPLACEMENT: | | 3.5 cu. in. (57 ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.8125 in. (46 mm) |
PISTON STROKE: | | 1.375 in. (35 mm) |
PISTON RING THICKNESS: | | 0.0625 in. pn 59436 |
CYLINDER TYPE: | | Aluminum with chrome plated bore, compression release |
INTAKE METHOD: | | 4 reed pyramid |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 12.5 lbs. (5.67 kg) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal, engages @ 3,000 rpm |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | WICO flywheel ignition |
CARBURETOR: | | Walbro SDC |
MAJOR REPAIR KIT: | | K10-SDC |
MINOR REPAIR KIT: | | D10-SDC |
AIR FILTER SYSTEM: | | Cellulose fiber element |
STARTER TYPE: | | Homelite automatic rewind |
OIL PUMP: | | Automatic gear driven plus manual override |
MAXIMUM ENGINE RPM: | | 6,000 under load |
IDLE RPM: | | |
IGNITION TIMING: | | 30 degrees before TDC |
BREAKER POINT SETTING: | | 0.015 in. (0.38 mm) |
FLYWHEEL/COIL AIR GAP: | | 0.004 to 0.008 in. (0.1 to 0.2 mm) |
SPARK PLUG TYPE: | | Champion CJ-6 |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball on mag end, caged needle roller on clutch end |
FUEL TANK CAPACITY: | | 23 fl. oz. (680 ml) |
FUEL OIL RATIO: | | 32:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade |
MIX OIL SPECIFICATION: | | Homelite two-cycle mix oil |
CHAIN PITCH: | | 3/8 in. |
CHAIN TYPE: | | Oregon 72D |
BAR MOUNT PATTERN: | | 01 link |
SHORTEST GUIDE BAR SUPPLIED: | | 12 in. (30 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 24 in. (61 cm) |
COLOUR SCHEME: | | Homelite Red enamel with White accents |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |