MANUFACTURED BY: | | SKIL CORPORATION |
| | CHICAGO, ILLINOIS, U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1977 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 2.1 cu. in. (34cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.4375 in. (36.5 mm) |
PISTON STROKE: | | 1.28125 in. (32.5 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | 6.5 Lbs. (2.94 kg) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal, 2 shoe |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Flywheel magneto |
CARBURETOR: | | Tillotson HS series |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | Cellulose fiber element |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Automatic with manual override |
MAXIMUM ENGINE RPM: | | 7,000 to 9,500 |
IDLE RPM: | | |
IGNITION TIMING: | | Fixed |
BREAKER POINT SETTING: | | 0.015 in. (0.38 mm) |
FLYWHEEL/COIL AIR GAP: | | 0.016 in. (0.41 mm) |
SPARK PLUG TYPE: | | Champion CJ6 |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller |
FUEL TANK CAPACITY: | | 10 fl. oz. (300 ml) |
FUEL OIL RATIO: | | 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade |
MIX OIL SPECIFICATION: | | Chain saw mix oil |
CHAIN PITCH: | | 1/4 in. |
CHAIN TYPE: | | Oregon |
BAR MOUNT PATTERN: | | 02 link |
SHORTEST GUIDE BAR SUPPLIED: | | 10 in. (25 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 16 in. (40 cm) |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |