MANUFACTURED BY: |  | STIHL ANDREAS MASCHINENFABRIK |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 1106 |
YEAR INTRODUCED: | | 1964 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 137ccm (8.36 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 66mm (2.60 in.) |
PISTON STROKE: | | 40mm (1.57 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 12 H.P.
8PS |
WEIGHT: | | 13.5kg with 40cm bar & chain
29.7 lbs. with 17 in. bar & chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Bosch |
CARBURETOR: | | Tillotson HL series |
MAJOR REPAIR KIT: | | RK-88HL |
MINOR REPAIR KIT: | | DG-5HL |
AIR FILTER SYSTEM: | | Nylon mesh element |
STARTER TYPE: | | Automatic rewind (Fairbanks Morse type) |
OIL PUMP: | | Automatic with manual assist |
MAXIMUM ENGINE RPM: | | 6,500 to 7,000 |
IDLE RPM: | | |
IGNITION TIMING: | | 3mm (0.12 in before TDC |
BREAKER POINT SETTING: | | 0.4mm (0.016 in. ) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Bosch WKA225T6 |
SPARK PLUG GAP: | | 0.5mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Needle roller |
FUEL TANK CAPACITY: | | 1.2 litres (2.54 pints) |
FUEL OIL RATIO: | | 20:1 after break in |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Castrol 2-stroke SAE 40 |
CHAIN PITCH: | | .404 in., optional 1/2 in. |
CHAIN TYPE: | | Oregon Chipper |
BAR MOUNT PATTERN: | | 19 link |
SHORTEST GUIDE BAR SUPPLIED: | | 53cm (21 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 152cm (60 in.) |
COLOUR SCHEME: | | Grey with Red plastic top cover |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |