MANUFACTURED BY: |  | BOLENS CHAIN SAWS |
 | | PORT WASHINGTON, WISCONSIN, U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1958 |
YEAR DISCONTINUED: | | 1960 |
ENGINE DISPLACEMENT: | | 6.45 cu. in. (105.6 cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 2.250 in. (57.1 mm) |
PISTON STROKE: | | 1.625 in. (41.27 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with cast iron sleeve |
INTAKE METHOD: | | Reed valves |
MANUFACTURER ADVERTISED H.P.: | | 4 @ 4,500 rpm |
WEIGHT: | | 24.5 lbs. (11.1 kg) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal, Fairbanks Morse |
DRIVE TYPE: | | Gear reduction, ratio provides 1000 fpm chain speed |
CONSTRUCTION: | | Sand cast magnesium |
MAGNETO TYPE: | | Wico FW2466B |
CARBURETOR: | | Tillotson HL series |
MAJOR REPAIR KIT: | | nla |
MINOR REPAIR KIT: | | DH-1HL |
AIR FILTER SYSTEM: | | Skinner ribbon element |
STARTER TYPE: | | Fairbanks Morse automatic rewind |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | 4,500 |
IDLE RPM: | | |
IGNITION TIMING: | | 0.15625 in. before TDC |
BREAKER POINT SETTING: | | 0.020 in. (0.51 mm) |
FLYWHEEL/COIL AIR GAP: | | fixed |
SPARK PLUG TYPE: | | Champion H12J |
SPARK PLUG GAP: | | 0.040 in. (1.01 mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball and caged needle roller |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 1/2 pint to 1 gallon = 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade 72 to 83 |
MIX OIL SPECIFICATION: | | Two-cycle mix oil |
CHAIN PITCH: | | 1/2 in. |
CHAIN TYPE: | | Oregon 10C |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 16 in. (40 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 37 in. (94 cm) |
COLOUR SCHEME: | | Metallic Green with Yellow enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |