MANUFACTURED BY: |  | DANARM UK |
 | | STROUD, GLOUSTERSHIRE, ENGLAND |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1948 |
YEAR DISCONTINUED: | | 1949 |
ENGINE DISPLACEMENT: | | 98cc |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 50mm (2.0 in.) |
PISTON STROKE: | | 50mm (2.0 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Cast Iron |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | 1.5 |
WEIGHT: | | 24.9kg (55 lbs.) |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Manual, two plate cork insert type |
DRIVE TYPE: | | Roller chain reduction |
CONSTRUCTION: | | Sand cast aluminum |
MAGNETO TYPE: | | Villiers flywheel type |
CARBURETOR: | | Villiers Junior type |
MAJOR REPAIR KIT: | | n/a |
MINOR REPAIR KIT: | | n/a |
AIR FILTER SYSTEM: | | Wire screen element |
STARTER TYPE: | | Rope |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | 06.3mm (0.250 in.) before TDC |
BREAKER POINT SETTING: | | 0.38mm (0.015 in.) |
FLYWHEEL/COIL AIR GAP: | | position is fixed |
SPARK PLUG TYPE: | | Lodge CB3 |
SPARK PLUG GAP: | | 0.025 in. (0.63mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 20:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Castrol XL |
CHAIN PITCH: | | |
CHAIN TYPE: | | |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | Orange enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |