Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 60

MANUFACTURED BY:
JONSEREDS FABRIKERS AB
PARTILLE, SWEDEN
SERIES OR ASSEMBLY NUMBER:
RS-60
YEAR INTRODUCED:
1966
YEAR DISCONTINUED:
1973
ENGINE DISPLACEMENT:
56cc (3.4 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
45mm (1.77 in.)
PISTON STROKE:
35mm (1.378 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Chrome plated aluminum
INTAKE METHOD:
Piston Ported
MANUFACTURER ADVERTISED H.P.:
2.65kw @ 7700 rpm
WEIGHT:
6.23kg
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Pagani
CARBURETOR:
Tillotson HS-21D series
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Nylon mesh cylinder
STARTER TYPE:
Jonsereds automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
10,200
IDLE RPM:
IGNITION TIMING:
3.2mm before TDC
BREAKER POINT SETTING:
0.4mm (0.016 in.)
FLYWHEEL/COIL AIR GAP:
0.3 mm (0.012 in.)
SPARK PLUG TYPE:
Champion CJ7Y
SPARK PLUG GAP:
0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
.95 litre (32 oz.)
FUEL OIL RATIO:
25:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-cycle mix oil
CHAIN PITCH:
9.525mm (.375 in.) 3/8"
CHAIN TYPE:
Chipper
BAR MOUNT PATTERN:
18 link
SHORTEST GUIDE BAR SUPPLIED:
33 cm (13 in.)
LONGEST GUIDE BAR SUPPLIED:
51 cm (20 in.)
COLOUR SCHEME:
Red and Silver enamel or Blue and Silver enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:


brochure courtesy Mats Hedin collection
 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.