Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 2-27

MANUFACTURED BY:
TURBOMATIC CHAIN SAWS LTD.
VANCOUVER, BC CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
195?
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Fluid
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
CARBURETOR:
Tillotson MD float type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Chore Girl shredded metal
STARTER TYPE:
Automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
J-11-J
SPARK PLUG GAP:
0.025 in.
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Main feature of this saw was a fluid clutch and heater front handle

Saw in SON Ranch Logging Museum collection, restored by Lowell Boyd, photographed by L. Trudel

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.