Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: D-45

MANUFACTURED BY:
McCULLOCH MOTORS CORP.
LOS ANGELES, CALIFORNIA, U.S.A.
SERIES OR ASSEMBLY NUMBER:
none
YEAR INTRODUCED:
1960
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.9 cu. in. (80cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.125 in. (54mm)
PISTON STROKE:
1.375 in. (35mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves with third port induction system
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
18 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium/aluminum alloy
MAGNETO TYPE:
McCulloch
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
McCulloch automatic rewind on left side
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
6,000 for maximum hp
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.020 in. (0.5mm) located under flywheel
FLYWHEEL/COIL AIR GAP:
0.010 in. (0.25 mm)
SPARK PLUG TYPE:
Champion J8J
SPARK PLUG GAP:
0.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
40 fl. oz. (1.182 litres)
FUEL OIL RATIO:
20:1
RECOMMENDED FUEL OCTANE:
70 octane or higher
MIX OIL SPECIFICATION:
McCulloch two-cycle chain saw mix
CHAIN PITCH:
.404 in.
CHAIN TYPE:
McCulloch Pintail
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:
24 in. (61cm)
COLOUR SCHEME:
McCulloch Yellow enamel with black air filter cover
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Built in Canada only



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.