Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: MT4510

MANUFACTURED BY:
efco
REGGIO EMILIA, ITALY
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
current in 2018
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
42.9 ccm
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
2.1 kW
WEIGHT:
4.5 kg
OPERATOR CONFIGURATION:
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
DRIVE TYPE:
CONSTRUCTION:
MAGNETO TYPE:
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
OIL PUMP:
MAXIMUM ENGINE RPM:
12,900 with bar and chain installed
IDLE RPM:
2,600 to 3,200
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion RCJ7Y
SPARK PLUG GAP:
0.5 mm
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
95VPX
BAR MOUNT PATTERN:
03 link
SHORTEST GUIDE BAR SUPPLIED:
35 cm
LONGEST GUIDE BAR SUPPLIED:
40 cm
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:




 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.