Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: F200

MANUFACTURED BY:
POULAN MANUFACTURING CORP.
SHREVEPORT, LOUSIANA, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1958
YEAR DISCONTINUED:
1960, obsoleted 1967
ENGINE DISPLACEMENT:
5.01 cu. in.
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
28 lbs., powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gear reduction
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon 10C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
18" Hard Nose type
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Usually sold with bow bar attachment, 10", 16" or 21"



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.