Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 410

MANUFACTURED BY:
JONSEREDS FABRIKERS AB
PARTILLE, SWEDEN
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1979
YEAR DISCONTINUED:
1981
ENGINE DISPLACEMENT:
35cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
40mm
PISTON STROKE:
28mm
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
1.8kW @ 10500 rpm
WEIGHT:
4.2kg
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
SEM electronic
CARBURETOR:
Tillotson HK-28C series
Walbro HDA-68-1
MAJOR REPAIR KIT:
RK-32HK for Tillotson
K22-HDA for Walbro
MINOR REPAIR KIT:
DG-1HK for Tillotson
D22-HDA for Walbro
AIR FILTER SYSTEM:
Nylon mesh cartridge
STARTER TYPE:
Jonsereds automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
14,000
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Bosch WS7F
SPARK PLUG GAP:
0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
.60 litres
FUEL OIL RATIO:
25:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil
CHAIN PITCH:
.325 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
01 link
SHORTEST GUIDE BAR SUPPLIED:
13 in. (33 cm)
LONGEST GUIDE BAR SUPPLIED:
20 in. (50 cm)
COLOUR SCHEME:
Red and Black enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.