Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 917.63202

MANUFACTURED BY:
CRAFTSMAN (SEARS ROEBUCK & CO.)
CHICAGO, IL U.S.A.
SERIES OR ASSEMBLY NUMBER:
917.63202
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.85 cu. in.
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.09 in.
PISTON STROKE:
1.41 in.
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gear reduction
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Power Products
CARBURETOR:
Power Products diaphragm type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Power Products automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
0.13 to 0.15 in. before TDC
BREAKER POINT SETTING:
0.015 to 0.019 in.
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion CJ-8
SPARK PLUG GAP:
0.033 to 0.038 in.
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-cycle mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Oregon
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
17 in. (43 cm)
LONGEST GUIDE BAR SUPPLIED:
21 in. (53 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
used Power Products AH-49 type 1471 engine

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.