Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: SL-245

MANUFACTURED BY:
MONO MANUFACTURING CO.
SPRINGFIELD, MISSOURI, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1966
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.3 cu. in. (70 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.09 in.(53 mm)
PISTON STROKE:
1.25 in. (31.7 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Fairbanks Morse centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast mangnesium
MAGNETO TYPE:
Tecumseh
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
0.13 to 0.14 in. (3.3 to 3.8 mm) before TDC
BREAKER POINT SETTING:
0.015 to 0.019 in. (0.38 to 0.48 mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion CJ-8
SPARK PLUG GAP:
0.033 to 0.038 in. (0.8 to 0.9 mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
3/4 pint to 1 gallon = 10.6:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 30 non-detergent
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
20 in. (51 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
used Power Products AH-44 engine type 1460



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.