Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 2-36 SS

MANUFACTURED BY:
DANARM UK
STROUD, GLOUSTERSHIRE, ENGLAND
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1979
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
2.1 cu. in. (34.4 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.4375 in. (36.5 mm)
PISTON STROKE:
1.281 in. (32.5 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
Not advertised
WEIGHT:
8 lbs. 2 oz. (3.7 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Yes
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Phelon
CARBURETOR:
Tillotson HU-18C
Walbro WA
MAJOR REPAIR KIT:
RK-14HU for Tillotson
K10-WAT for Walbro
MINOR REPAIR KIT:
DG-2HU for Tillotson
D10-WAT for Walbro
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
6,500
IDLE RPM:
IGNITION TIMING:
25 degrees before TDC
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.016 in. (0.41 mm)
SPARK PLUG TYPE:
Champion CJ-6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
300 ml
FUEL OIL RATIO:
20:1
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Chain saw two-cycle mix oil
CHAIN PITCH:
3/8 in. Low Profile
CHAIN TYPE:
Oregon 91
BAR MOUNT PATTERN:
02 link
SHORTEST GUIDE BAR SUPPLIED:
12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Saw manufactured by Trail Manufacturing Ltd. (Frontier)



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.