Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: PONY

MANUFACTURED BY:
LOMBARD
ASHLAND, MASS., U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1972
YEAR DISCONTINUED:
1975
ENGINE DISPLACEMENT:
2.1 cu. in. (34 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.4375 in. (36.5 mm)
PISTON STROKE:
1.28125 in. (32.5 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
6.5 lbs. (2.94 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Flywheel magneto
CARBURETOR:
Tillotson HU or Walbro WA
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
7,000 to 9,500
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
0.016 in. (0.41 mm)
SPARK PLUG TYPE:
Champion CJ6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
10 fl. oz. (300 ml)
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular grade 72 to 83
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil
CHAIN PITCH:
1/4 in.
CHAIN TYPE:
Oregon 25AP
BAR MOUNT PATTERN:
02 link
SHORTEST GUIDE BAR SUPPLIED:
10 in. (25 cm)
LONGEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
COLOUR SCHEME:
Orange
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Saw manufactured by Skil Corp. Vancouver Canada for Lombard Corp.


Colour Photographs courtesy James Pask, Geraldine, New Zealand

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2022 MIKE ACRES - All rights are reserved.