Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 616 LATE

MANUFACTURED BY:
SOLO KLEINMOTOREN GmbH
STUTTGART, GERMANY
SERIES OR ASSEMBLY NUMBER:
series 2 after serial 9000 through serial 26021
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
52cc (3.2 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
45mm (1.143 in.)
PISTON STROKE:
32 mm (1.260 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
7.9kg (17.5 lbs.) with 40cm (16 in.) bar & chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
Optional, mechanical type
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Walbro HDC-50
MAJOR REPAIR KIT:
K10-HDC
MINOR REPAIR KIT:
D10-HDC
AIR FILTER SYSTEM:
Two laminar plastic screens
STARTER TYPE:
SOLO automatic rewind
OIL PUMP:
Automatic, adjustable
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
28 degrees or 2.4 mm (.095 in.) before TDC
BREAKER POINT SETTING:
0.35 to 0.45 mm (0.014 to 0.017 in.)
FLYWHEEL/COIL AIR GAP:
0.25 mm (0.010 in.)
SPARK PLUG TYPE:
Bosch WKA 200TR6
SPARK PLUG GAP:
0.5 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Roller
FUEL TANK CAPACITY:
530 ml (18 fl. oz.
FUEL OIL RATIO:
50:1 with SOLO two-cycle mix oil
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
SOLO mix oil
CHAIN PITCH:
.325 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
35cm (14 in.)
LONGEST GUIDE BAR SUPPLIED:
50cm (20 in.)
COLOUR SCHEME:
Red and Black
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.