Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 104

MANUFACTURED BY:
WRIGHT SAW Div. POULAN Mfg. Corp.
SHREVEPORT, LA U.S.A.
SERIES OR ASSEMBLY NUMBER:
10
YEAR INTRODUCED:
1976
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
2.0 cu. in. (32ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
1.25 in. (31.7 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Phelon
CARBURETOR:
Walbro WA-19
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Foam element
STARTER TYPE:
Poulan automatic rewind
OIL PUMP:
Automatic, pressurized oil tank.
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.014 in to 0.016 in.
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion CJ8
SPARK PLUG GAP:
0.025 in.
CRANKSHAFT MAIN BEARINGS:
Roller, Torrington type
FUEL TANK CAPACITY:
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-cycle mix
CHAIN PITCH:
3/8 in. low profile
CHAIN TYPE:
Poulan P100, un-chromed
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
10 in. (25cm)
LONGEST GUIDE BAR SUPPLIED:
12 in. (30 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Manufactured with brand name Wright by Poulan using Micro 25 model



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.