Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 58008 powerhead

MANUFACTURED BY:
CHRYSLER OUTBOARD CORP.
HARTFORD WI U.S.A.
SERIES OR ASSEMBLY NUMBER:
58008 powerhead
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
5.8 cu. in. (95 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0625 in. (52.3 mm)
PISTON STROKE:
1.750 in. (44.4 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
DRIVE TYPE:
Crankshaft rotates clockwise at drive end
CONSTRUCTION:
Alumunum
MAGNETO TYPE:
Wico FW2639
CARBURETOR:
usually Tillotson diaphragm type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
usually Fairbanks Morse automatic rewind
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
Secure stator plate mid range of enongated slots, or 0.15625 in. (3.9 mm) BTDC
BREAKER POINT SETTING:
0.020 in. (0.5 mm)
FLYWHEEL/COIL AIR GAP:
position is fixed
SPARK PLUG TYPE:
Champion H8J
SPARK PLUG GAP:
0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS:
Ball and caged needle roller
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 U.S. gallon
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
SAE 30 or 40 two-cycle engine oil
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
OEM engine on 1950's chain saws



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.