Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: SUPER 645

MANUFACTURED BY:
HOFFCO INC.
RICHMOND, INDIANA, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1959
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
7.0 cu. in. (115 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.25 in. (57 mm)
PISTON STROKE:
1.75 in. (44.4 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
5
WEIGHT:
24.5 lbs. (11.1 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gear reduction with Vari-Speed transmission
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico FW-2639
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
DG-1HL
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
4,500
IDLE RPM:
IGNITION TIMING:
0.15625 in. (3.9 mm) before TDC with stator secured mid range on mounting holes
BREAKER POINT SETTING:
0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion H8J
SPARK PLUG GAP:
0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS:
Ballon clutch end, caged needle roller on flywheel end
FUEL TANK CAPACITY:
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular grade 72 to 83
MIX OIL SPECIFICATION:
Two cycle chain saw mix oil
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon 9C or 41C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
25 in. (63.5 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used Chrusler (West Bend) 2761 engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.