Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 47

MANUFACTURED BY:
INDIAN CHAIN SAWS
CRYSTAL LAKE, ILLINOIS, U.S.A.
SERIES OR ASSEMBLY NUMBER:
47H, 47HC, 47HR, 47HS, 47HSR
YEAR INTRODUCED:
1960?
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.7 cu. in.
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0 in.
PISTON STROKE:
1.5 in.
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
4
WEIGHT:
17-1/2 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast magnseium
MAGNETO TYPE:
Wico
CARBURETOR:
Tilltoson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
4,500
IDLE RPM:
IGNITION TIMING:
0.175 in. before TDC
BREAKER POINT SETTING:
0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP:
0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 30 non detergent
CHAIN PITCH:
.404 in.
CHAIN TYPE:
Draper Blue Jet
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
used Power Products AH-47 engine or Chrysler 50008 engine.



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.