Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 400

MANUFACTURED BY:
PIONEER SAWS LTD.
PETERBOROUGH, ONTARIO, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1958
YEAR DISCONTINUED:
1959
ENGINE DISPLACEMENT:
5.45 cu. in. (89ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.25 in. (57mm)
PISTON STROKE:
1.375 in, (35mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 3 fiber shoes
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Aluminum
MAGNETO TYPE:
Pioneer flywheel type
CARBURETOR:
Brown
MAJOR REPAIR KIT:
none available for Brown carb
MINOR REPAIR KIT:
none available for Brown carb
AIR FILTER SYSTEM:
Flocked screen
STARTER TYPE:
Pioneer automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
position is fixed
BREAKER POINT SETTING:
0.022 in. (.55mm)
FLYWHEEL/COIL AIR GAP:
0.008 to 0.012 in. (0.2 to 0.3 mm)
SPARK PLUG TYPE:
Champion J8J
SPARK PLUG GAP:
0.025 in. (0.6mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
20 fl. oz. (590ml)
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-cycle mix oil
CHAIN PITCH:
.400 in.
CHAIN TYPE:
Pioneer C3F, C3G
BAR MOUNT PATTERN:
01 link
SHORTEST GUIDE BAR SUPPLIED:
16 in.
LONGEST GUIDE BAR SUPPLIED:
20 in.
COLOUR SCHEME:
Pioneer Yellow enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.