Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: C

MANUFACTURED BY:
DOLMAR Maschinen-Fabrik GmbH & Co.
HAMBURG, GERMANY
SERIES OR ASSEMBLY NUMBER:
C50, 65, 80, 100, 125, 150, 160
YEAR INTRODUCED:
1930
YEAR DISCONTINUED:
1937
ENGINE DISPLACEMENT:
200 ccm (12.2 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
5.5
WEIGHT:
45 kg. (99 lbs.) powerhead only
OPERATOR CONFIGURATION:
Two Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Manual dry plate
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Sand cast magnesium & aluminum
MAGNETO TYPE:
Flywheel magneto
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Wire screen
STARTER TYPE:
Leather strap
OIL PUMP:
Automatic, built into tail stock
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
50 cm (24 in.)
LONGEST GUIDE BAR SUPPLIED:
160 cm (63 in.)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
motor supplied by ILO, model E200



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.