Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: P61

MANUFACTURED BY:
PIONEER SAWS LTD.
PETERBOROUGH, ONTARIO, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1980
YEAR DISCONTINUED:
1982
ENGINE DISPLACEMENT:
6.0 cu. in. (98cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.25 in. (57mm)
PISTON STROKE:
1.50 in. (38.1mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Chrome plated aluminum
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Mechanical
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Tillotson HS-213A series
Walbro SDC-53C, 53D
MAJOR REPAIR KIT:
Tillotson RK-23HS
Walbro K10-SDC
MINOR REPAIR KIT:
Tillotson DG-5HS/T
Walbro D10-SDC
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Pioneer automatic rewind
OIL PUMP:
Automatic, worm gear driven off crankshaft with manual override pump
MAXIMUM ENGINE RPM:
9,500
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion KCJ7Y
SPARK PLUG GAP:
0.030 in. (0.76mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
24:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Pioneer OMC two-cycle mix oil
CHAIN PITCH:
3/8 in. or .404 in.
CHAIN TYPE:
Pioneer
BAR MOUNT PATTERN:
20 link
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:
36 in. (91cm)
COLOUR SCHEME:
Pioneer Lime Green with Forest green top cover and rear handle
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.