Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 180

MANUFACTURED BY:
HOMELITE-TERRY MACHINERY
POINTE CLAIRE, QUEBEC, CANADA
SERIES OR ASSEMBLY NUMBER:
UT10727-C, UT10752
YEAR INTRODUCED:
1976
YEAR DISCONTINUED:
1982
ENGINE DISPLACEMENT:
1.9 cu. in. (33 ccm)
NUMBER OF CYLINDERS:
Homelite Two-Cycle single cylinder loop scavenged engine
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
8.75 lbs.
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
DRIVE TYPE:
CONSTRUCTION:
MAGNETO TYPE:
CARBURETOR:
Walbro or ZAMA
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
8.5 fl. oz.
FUEL OIL RATIO:
32:1
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
14 in.
LONGEST GUIDE BAR SUPPLIED:
16 in.
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
IPL no. 19648
SERVICE MANUAL:

COMMENTS:
Manufactured and sold in Canada. Terry Machinery
was a division of Textron Canada.




 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.