Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: G5000

MANUFACTURED BY:
ZENOAH
HUSQVARNA ZENOAH CO. LTD.
SAITAMA, JAPAN
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
49.3 ccm
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
2.7 kW
WEIGHT:
5.1 kg powerhead only
OPERATOR CONFIGURATION:
One Man
HANDLEBAR SYSTEM:
Anti-Vibration
CHAIN BRAKE:
Inertia or manual activation
CLUTCH:
centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium, injection molded polymer
MAGNETO TYPE:
Electronic
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
Fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
550 ml
FUEL OIL RATIO:
50:1
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
.325 in.
CHAIN TYPE:
Oregon 21BPX
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
45 cm (18 in.)
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:




 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.