Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: QUICK 60 & 80

MANUFACTURED BY:
PPK
SABREVOIE, FRANCE
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1947
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
225 ccm (13.7 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
7
WEIGHT:
40 kg with 60 cm bar & chain
OPERATOR CONFIGURATION:
Two Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
MAGNETO TYPE:
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Manual with rope
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
Scratcher
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
60 cm (24 in.)
LONGEST GUIDE BAR SUPPLIED:
80 cm (31.5 in.)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Visit http://www.lycksele.se/skogsmuseet

PPK model 80 in Angelo Trepanier collectionPhotographs below courtesy Lycksele Forestry Museum, Sweden
 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.