Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: C-4R

MANUFACTURED BY:
COBRA CHAIN SAWS
CRYSTAL LAKE, ILLINOIS, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1962
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.7 cu. in. (77 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0 in. (50.8 mm)
PISTON STROKE:
1.5 in. (38 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
5
WEIGHT:
19 lbs. (8.6 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HL Diaphragm type
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
DG-1HL
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
4,500
IDLE RPM:
IGNITION TIMING:
0.175 in. (4.44 mm) before TDC
BREAKER POINT SETTING:
0.030 in. (0.76 mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP:
0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE:
Regular grade 72 to 83
MIX OIL SPECIFICATION:
SAE 30 non-detergent
CHAIN PITCH:
.404 in.
CHAIN TYPE:
Oregon 50C3
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
20 in. (50 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used Power Products AH-47 engine type 1197A
Sold for $174.50 with 20 inch bar & chain in 1962



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.