Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 82

MANUFACTURED BY:
ROOT MANUFACTURING COMPANY
BAXTER SPRINGS, KANSAS, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
8.2 cu. in. (134 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.53125 in. (64.2 mm)
PISTON STROKE:
1.625 in. (41.2 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico flywheel typ
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
22 degrees before TDC. Position stator full retard position
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion L-4 or L-4J, AC 42FF
SPARK PLUG GAP:
0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
3/4 pint to 1 gallon
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used West Bend 82006 engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.