Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: CS-7

MANUFACTURED BY:
TERRILL D.D. SAW CO.
BANGOR, MAINE, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1957
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
6.45 cu. in. (105.6 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.25 in. (57.1mm)
PISTON STROKE:
1.625 in. (41.2mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron liner
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
25 lbs. (11.34 kg.)
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gear reduction
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Wico FW2471B
CARBURETOR:
Tillotson HP series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
0.15625 in. (3.96 mm) before TDC
BREAKER POINT SETTING:
0.020 in. (0.51mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion J-12-J
SPARK PLUG GAP:
0.040 in. (1.01mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 gallon = 16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 30
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon 10C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
14 in. (35 cm)
LONGEST GUIDE BAR SUPPLIED:
36 in. (91 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
used West Bend 2727 engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.