Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 2MG-42 CHAIN SAW

MANUFACTURED BY:
MALL TOOL COMPANY
CHICAGO, ILLINOIS, U.S.A.
CRETE, ILLINOIS, U.S.A.
TORONTO, ONTARIO, CANADA
GUELPH, ONTARIO, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1955
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
6.45 cu. in. (105cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.25 in. (57mm)
PISTON STROKE:
1.625 in. (41mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Chrome plated aluminum
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
5 Brake horsepower
WEIGHT:
OPERATOR CONFIGURATION:
Two Man
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
2 shoe centrifugal Fairbanks Morse
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Bendix Scintilla
CARBURETOR:
Tillotosn ME float type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Mall automatic rewind
OIL PUMP:
Eccentric piston in transmission
MAXIMUM ENGINE RPM:
5000
IDLE RPM:
IGNITION TIMING:
30 degrees B.T.D.C.
BREAKER POINT SETTING:
.018 in. to .020 in.
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
CHAMPION J6
SPARK PLUG GAP:
.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball and roller types
FUEL TANK CAPACITY:
2-3/4 U.S. pints
FUEL OIL RATIO:
3/4 pint to 1 U.S. gallon
RECOMMENDED FUEL OCTANE:
72 to 84 octane regular grade
MIX OIL SPECIFICATION:
SAE 30 non-detergent or MALL oil
CHAIN PITCH:
9/16 in. (14mm)
CHAIN TYPE:
Mall Chrome plated side planer
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
42 in. (106cm)
COLOUR SCHEME:
Mall Red enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.