Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: GLP 500

MANUFACTURED BY:
LOMBARD
ASHLAND, MASS., U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1968
YEAR DISCONTINUED:
1970
ENGINE DISPLACEMENT:
5.1 cu. in.
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.08 in.
PISTON STROKE:
1.50 in. (38.1 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
14 lbs. 15 oz. with 16 in. bar & chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HS series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Lombard automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
7,000 to 8,000
IDLE RPM:
IGNITION TIMING:
30 degrees before TDC
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion CJ6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
28 oz.
FUEL OIL RATIO:
1/2 pint to 1 gallon
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Lombard two-cycle mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Oregon 72D
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED:
24 in. (60 cm)
COLOUR SCHEME:
Metallic Blue with White enamel paint
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2022 MIKE ACRES - All rights are reserved.