Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: AC-65

MANUFACTURED BY:
ALLIS CHALMERS CO.
MILWAUKEE, WISCONSIN, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1975
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
1.86 cu. in. (30.5 ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.375 in. (34.92 mm)
PISTON STROKE:
1.250 in. (31.75 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
8 lbs. (3.6 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Phelon
CARBURETOR:
Tillotson HU-22A
Walbro WA
MAJOR REPAIR KIT:
RK-14HU
K10-WAT
MINOR REPAIR KIT:
DG-2HU
D10-WAT
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Poulan automatic rewind
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
8,500 free with bar and chain installed
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.020 to 0.22 in. (0.51 to 0.55 mm)
FLYWHEEL/COIL AIR GAP:
0.010 (0.25 mm)
SPARK PLUG TYPE:
Champion CJ8
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regualr
MIX OIL SPECIFICATION:
Two-cycle mix oil
CHAIN PITCH:
1/4 in.
CHAIN TYPE:
Poulan
BAR MOUNT PATTERN:
03 link
SHORTEST GUIDE BAR SUPPLIED:
10 in. 925 cm)
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Bright Green
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Saw manufactured by Poulan, based on Model 20D



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.