Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 250 Hi-Baller

MANUFACTURED BY:
DANARM CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1947
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
250cc (15.25 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.481 in. (63 mm)
PISTON STROKE:
3.149 in. (80 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Cast Iron
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
120 lbs. with 48 in. bar & chain
54.4 kg with 122 cm bar & chain
OPERATOR CONFIGURATION:
Two Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Manual. Multi disc dry type
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Villiers flywheel type
CARBURETOR:
Villiers float type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Wire screen element
STARTER TYPE:
Rope
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
3,000 to 3,600
IDLE RPM:
IGNITION TIMING:
0.375 in. before TDC
BREAKER POINT SETTING:
0.015 in. (0.38mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Lodge CB3 (18mm)
SPARK PLUG GAP:
0.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
12:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 40
CHAIN PITCH:
.750 in. 3mm gauge
CHAIN TYPE:
Scratcher type
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
36 in. (91.5mm)
LONGEST GUIDE BAR SUPPLIED:
48 in. (122cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Engine supplied by Villiers



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.