Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: AC-295

MANUFACTURED BY:
ALLIS CHALMERS CO.
MILWAUKEE, WISCONSIN, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1976
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
3.6 cu. in. (59 ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.788 in. (45.41 mm)
PISTON STROKE:
1.437 in. (36.5 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
12.75 lbs. (5.78 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Phelon
CARBURETOR:
Tillotson HS series
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Poulan automtaic rewind, with compression release
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
6,500
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
position is fixed
SPARK PLUG TYPE:
Champion CJ8
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Ball and caged needle roller
FUEL TANK CAPACITY:
FUEL OIL RATIO:
32:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Poulan two-cycle chain saw mix oil
CHAIN PITCH:
3/8 in. Power Sharp type
CHAIN TYPE:
Poulan
BAR MOUNT PATTERN:
10 link
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
24 in. (61 cm)
COLOUR SCHEME:
Bright Green enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
saw manufactured by Poulan, based on model 306



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.