Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: SUPER WIZ 80

MANUFACTURED BY:
HOMELITE-TEXTRON
PORT CHESTER, NEW YORK, USA
SERIES OR ASSEMBLY NUMBER:
UT24438A
YEAR INTRODUCED:
YEAR DISCONTINUED:
1974
ENGINE DISPLACEMENT:
5.8 cu. in.
NUMBER OF CYLINDERS:
Homelite Two-Cycle single cylinder loop scavenged engine
CYLINDER BORE:
2.1875 in.
PISTON STROKE:
1.546875 in.
PISTON RING THICKNESS:
0.0625 in. 2 rings used, pn 56291
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
4 reed pyramid
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
22 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 6 metal shoes
DRIVE TYPE:
Gear reduction
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Phelon flywheel magneto with breaker points
CARBURETOR:
Tillotson HL-117C
MAJOR REPAIR KIT:
RK-88HL
MINOR REPAIR KIT:
Dg-5HL
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Fairbanks Morse automatic rewind,
replacement cord is
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
6,000 under load
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion UJ-11G or can use J6J
SPARK PLUG GAP:
0.025 in. 90.63 mm)
CRANKSHAFT MAIN BEARINGS:
Ball on mag end, caged needle roller on clutch end
FUEL TANK CAPACITY:
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Homelite Chain Saw mix oil
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon 10C
BAR MOUNT PATTERN:
16 link
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.