Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 633

MANUFACTURED BY:
SOLO KLEINMOTOREN GmbH
STUTTGART, GERMANY
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1999
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
36.3cc (2.2 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
Nikasil
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
1.5kW
WEIGHT:
3.5kg (7.7 lbs.) powerhead only
OPERATOR CONFIGURATION:
One Man operation, top handle saw
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
MAGNETO TYPE:
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
3/8 in. low profile
CHAIN TYPE:
Oregon 90VG
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
12 in.
LONGEST GUIDE BAR SUPPLIED:
12 in.
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Current professional saw



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.