Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: MARK 2

MANUFACTURED BY:
DANARM UK
STROUD, GLOUSTERSHIRE, ENGLAND
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1941
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
250cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
63mm (2.48 in.)
PISTON STROKE:
83mm (3.26 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Cast Iron
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
Two Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Manual, dry asbestos disks
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Villiers flywheel type
CARBURETOR:
Villiers float type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Wire screen element
STARTER TYPE:
Rope
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
3,000 to 3,600
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
12:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 40
CHAIN PITCH:
.750 in.
CHAIN TYPE:
Danarm Scratcher
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
39 in. (1 meter)
LONGEST GUIDE BAR SUPPLIED:
58 in. (1.45 meters)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.