Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: P700

MANUFACTURED BY:
ALPINA (Societa per Azioni)
CONEGLIANO, ITALY
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
68ccm
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
6
WEIGHT:
13 lbs., powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Inertia activated
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Tillotson HS series
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Foam
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.45 mm (0.018 in.)
SPARK PLUG TYPE:
Champion CJ7Y, RCJ7Y
SPARK PLUG GAP:
0.5 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
19 fl. oz.
FUEL OIL RATIO:
40:1
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
18 in. (45 cm)
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.