Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 22 "Canadien"

MANUFACTURED BY:
PM (Power Machinery Ltd.)
VANCOUVER, BRITISH COLUMBIA, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1958
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
5 cu. in. (82 ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.250 in. (57mm)
PISTON STROKE:
1.250 in. (31.7mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Cast Iron Sleeve
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
6.1 @ 6,000 rpm
WEIGHT:
24 lbs. (10.8 kg) powerhead only
OPERATOR CONFIGURATION:
One man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gear Drive 2.7-1 ratio or 1.9-1 ratio
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico FW-2456 series
CARBURETOR:
Tillotson HL-29A diaphragm type
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
DG-1HL
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual pump
MAXIMUM ENGINE RPM:
6,000 to 6,500
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
fixed, not adjustable
SPARK PLUG TYPE:
Champion J-8 (PM 10252)
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged roller
FUEL TANK CAPACITY:
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 30 or 40 non-detergent
CHAIN PITCH:
1/2 in, .500 in. (12.7mm)
CHAIN TYPE:
Oregon 41C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
24 in. (60 cm)
LONGEST GUIDE BAR SUPPLIED:
48 in. (121 cm)
COLOUR SCHEME:
White with blue accents
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.