Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 5300

MANUFACTURED BY:
TITAN (PROPULSION ENGINE CORP)
SOUTH MILWAUKEE, WISCONSIN
SERIES OR ASSEMBLY NUMBER:
TITAN 5300
YEAR INTRODUCED:
1959
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
7 cu. in. (115cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.250 in (57mm)
PISTON STROKE:
1.750 in. (44.4mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
5 @ 5500 RPM
WEIGHT:
26.5 lbs. (12kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Fairbanks Morse Centrifugal
DRIVE TYPE:
Gear reduction ratio 2.59:1
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Wire screen
STARTER TYPE:
Automatic rewind
OIL PUMP:
Manal
MAXIMUM ENGINE RPM:
5,500
IDLE RPM:
IGNITION TIMING:
0.15625 in. (3.9mm) before TDC
BREAKER POINT SETTING:
0.020 in. (0.51mm)
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion H8J
SPARK PLUG GAP:
0.030 in. (0.76mm)
CRANKSHAFT MAIN BEARINGS:
Ball on clutch end, caged needle roller on flywheel end
FUEL TANK CAPACITY:
1.8 U.S. quarts
FUEL OIL RATIO:
1/2 pint to 1 U.S. gallon
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Two-cycle mix oil
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon 10C
Bluejet 50-51
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:
37 in. (94cm)
COLOUR SCHEME:
Titan Yellow with Metallic Brown
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used West Bend 70001engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.