Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: FB35

MANUFACTURED BY:
FRONTIER CHAIN SAWS
TRAIL, BRITISH COLUMBIA, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1979
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
2.1 cu. in. (34.4cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.4375 in. (36.5 mm)
PISTON STROKE:
1.281 in. (32.5 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
Not advertised
WEIGHT:
6 lbs. 11 oz. (2.77 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
Mechanical
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Phelon electronic
CARBURETOR:
Tillotson HU-18C
Walbro WA type
MAJOR REPAIR KIT:
RK-14HU
K10-WAT
MINOR REPAIR KIT:
DG-2HU
D10-WAT
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Frontier automatic rewind
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
6,500
IDLE RPM:
IGNITION TIMING:
25 degrees before TDC
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.016 in. (0.41 mm)
SPARK PLUG TYPE:
Champion CJ6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
300 ml
FUEL OIL RATIO:
20:1
RECOMMENDED FUEL OCTANE:
Regualr
MIX OIL SPECIFICATION:
Chain saw two-cycle mix oil
CHAIN PITCH:
3/8 in. low profile
CHAIN TYPE:
Oregon 91
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
COLOUR SCHEME:
Orange enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.