Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: Universal

MANUFACTURED BY:
PM (Power Machinery Ltd.)
VANCOUVER, BRITISH COLUMBIA, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1946
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.875 in. (47.6mm)
PISTON STROKE:
1.75 in. (44mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Cast nickel grey iron
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
36 lbs. with 20 in. bar
OPERATOR CONFIGURATION:
One man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Manual
DRIVE TYPE:
Roller drive chain reduction
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico model FWS18
CARBURETOR:
Tillotson AJ-13B float type
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
nla
AIR FILTER SYSTEM:
Brass screen
STARTER TYPE:
Rope
OIL PUMP:
Manual pump
MAXIMUM ENGINE RPM:
3,800
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
.018 in to .020 in.
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion J-8 (PM # 10252)
SPARK PLUG GAP:
.025 in.
CRANKSHAFT MAIN BEARINGS:
Ball type
FUEL TANK CAPACITY:
40 oz. (1.18 litres)
FUEL OIL RATIO:
1 pint to 1 gallon Imperial measure
RECOMMENDED FUEL OCTANE:
regular grade
MIX OIL SPECIFICATION:
SAE 50
CHAIN PITCH:
9/16 in.
CHAIN TYPE:
PM No. 3 standard chain
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
14 in. (35.5cm)
LONGEST GUIDE BAR SUPPLIED:
26 in. (66cm)
COLOUR SCHEME:
Aluminum not painted
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
This saw series runs from serial number 100 to 5999



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.